Can somebody please tell me what the thickness is of the original spacers behind the outer rear wheel bearing using the original bearing and also when you use the 30204 ? I know this has been answered before but I put the subject into the search box and it came up with seventeen and I waded my way through all of these but found nothing. Thanking you in anticipation. Dave.
My notes on the subject are that the original bearing cup retaining ring (mild steel) is 0.155" - 0.160". For the modern metric bearings, the rings should be about 0.050" (50 thou) thinner. ie 0.105"- 0.110". Ron
