Help needed.
I'm.building up a WM20.
It's a bit of a mixed bag bitsa.
When I offer up the gearbox and front engine plates there is a 4mm difference in width.
I've made sure the gearbox spacers are in the right way, brake anchor strap is in-between frame and the L hand spacer, the gear box fits nicely and left had gearbox plates and front engine plates line up nicely.
However the front plates are 4mm narrower and do not line up on the RHS where the front engine plates are 4mm narrower than gearbox , I hope this makes sense... What is wrong?
Err just ignore that's ive made an embarrassing error, I measured the external diameter of the plates not the inside..... All is well They're different thicknesses Doh 😖
