Questions? Looking for parts? Parts for sale? or just for a chat,

The WD Motorcycle forum

WD Motorcycle forum
Start a New Topic 
Author
Comment
View Entire Thread
Re: Where and why did all the oil go!

Hi Allan
many thanks for your helpful reply.
I checked the primary oil level and it was just below the level plug so I am guessing engine oil is not disappearing into there.
I'll check the preesure release valve and one way valve in the pump pick up pick and double check oil pipes.
It may have been an issue for a while but hammering it up the M1 on the hottest day of the year on 40 grade oil may have exacerbated it. It ha soften leaked a bit on parking up and I'd convinced myself this was from the gear box but yesterday on checking its still pretty full.

I am going to follow up your advice on oil in the primary and do a double check

Cheers
Dean

Re: Where and why did all the oil go!

Well so far the only likely culprit is the mag pinion seal. This was extreemly sloppy with about 1/16" gap between the pinion shaft and inner seal lip.
I was entertained a couple of weeks ago by the sight of the magdyno bouncing up and down when the engine was running so not doubt that did for the seal. Awkward size to find from a mainstream supplier (Simply Bearings).Russells reckon they have them but I'll have to wait 'til after the bank holiday to confirm

Re: Where and why did all the oil go!

Plenty on Ebay and I guess Mark has them too.

https://www.ebay.co.uk/sch/i.html?_nkw=BSA+M20+mag+pinion+oil+seal&_sacat=0&_from=R40&_trksid=p4432023.m570.l1313

Ron

email (option): ronpier@talk21.com

Re: Where and why did all the oil go!

Thanks Ron
another senior moment for me given how much time I usually spend on Ebay that I didn't look there first!
That's multi-tasking for you!

Nieuwe pagina 1