I need some threads repaired on a set of WM20 fork blades.
Can someone tell me the threads at the bottom of the blades where the mudguard stays fit, adjacent to the axle?
And I measure most of the larger threads on the forks as 3/8 & 26tpi?

Bob the front stay threads are 1/4 x 26tpi. Ron

email (option): ronpier@talk21.com

Thanks for the quick reply, Ron.

The only one at 3/8" is the brake plate anchor bolt.

https://pesltd.uk/?product=15-7104

Mark

email (option): pes.sales@btconnect.com

That's right. the fork spindle bolts and front stand are 5/16" x 26tpi. Ron

email (option): ronpier@talk21.com

Sorry folks, in mentioning the 3/8 threads I didn't make it clear I was referring to various threads on the forks such as the top spring securing nut, spring stop securing nut etc. I measured these as 3/8x26tpi.