Your parts should resemble what is shown on the Draganfly website….

email (option): teladelujo@msn.com

There are 2 types of stands circulating at the moment
The originals that have threads on the inside flange and use a 1/2 nut as a lock nut
The Indian repos that use a long bolt with pipe thread and no thread on the back flange
Which type do you have ?

I just checked some nasty one like Drags supply that we have in stock and there is enough thread for a lock nut.

https://pesltd.uk/?canvas=home&ptno=24-6055

Mark

email (option): pes.sales@btconnect.com

Thanks,

I have a original rear stand, that has one the holes threaded on the rear flange, it's a very heavy stand.

The bolts are new.

Do I need original bolts then I would imagine?

Thanks

Danny

email (option): burt.danny@yahoo.co.uk

Mark,

I can measure the shank and let you know what mine are. Could you check it against what you have in stock please mate?

Cheers

Danny

email (option): burt.danny@yahoo.co.uk

Hope this helps

Mark

email (option): pes.sales@btconnect.com

Mark
You drawing is incorrect for a start the Hex size is 23/32”
BSA did not use 19mm

You really must learn to read the previous posts Darren.

It is mentioned that I considered the replacement bolts as "Nasty"

The drawing is of such.

My fault as I should have titled the drawing as "Nasty"

email (option): pes.sales@btconnect.com

Mark,

My 'nasty' bolts don't equal that drawing, hence the question. So all,please be aware there is a bad batch of these bolts out there! It's not just a one off as bought these twice now with the same issue!

Original bolts purchased.

Thanks for everyone's help.

Danny

email (option): burt.danny@yahoo.co.uk

I think John O'Brien, mentioned he had some Danny. Though I also think he's in England now.
If they are getting harder to find and someone can post the original dimensions, it's easy to knock a few up.
I have the hex size now :)

email (option): pes.sales@btconnect.com

Indian replica stands were copied off the pre war type and have the wrong size holes for the wartime stand bolts..From memory wartime bolts have a 7/16" shank...Ian

email (option): ian@wright52.plus.com

Mark,

I picked up a spare bolt. Let me know your address and will post one upto you when they arrive mate.

Cheers

Danny

email (option): burt.danny@yahoo.co.uk

I’ll email you Danny when I’m back at work, I don’t have email at home.

Mark

email (option): pes.sales@btconnect.com