I've reposted this purely because Anton, the original poster, has put his query at the end of a fairly old post...One for the Norton Men!!...Ian

['Would someone be able to tell me how many inches tall a Norton 16h and or 18/es2 motor is from the bottom of the crankcase to the top of the head / rockerbox? Thanks Anton...']

email (option): ian@wright52.plus.com

Ian, Anton,

I only have 16H engines.
Measured without crankcase bash plate.
Height over fins, approx 470 mm.
Height over compression plug ca 480 mm.

cheers,

Rob

email (option): wd16h@telfort.nl

I answered on the other post, but 16H is about 18.5" and 38 pattern Model 18 is about 22". But measured with tank on so not exact.

email (option): horror@blueyonder.co.uk