I made some of these screws in the past .also have 2 from tsjechie..they are indeed different.they have it made to attach 2 wires instead of 1 also the base is not have the rubber inside.
But anyway they are the best copy in the world.
know wire these in with a 21W single filament bulb with a 25W x 1 ohm resister in the tail lamp cable which reduces the glow to the equivalent of 6-8W. The brake lamp cable is wired in the other side of the resistor to use the full 21W. Ron
Hi Ron
Can you pleaase tell me where you sourced resistor for stop/tail function? I have a nice old wipac rear light I want to use on a Triumph I am building with a single filament bulb and would like to convert to stop/tail..
Cheers Dave