Questions? Looking for parts? Parts for sale? or just for a chat,

The WD Motorcycle forum

WD Motorcycle forum
Start a New Topic 
Author
Comment
View Entire Thread
Re: New clutch item Robb Nortier.

As Ian said, after borrowing his, I made my own and wouldn't want to be without it. The only difference is, that Ian probably used a BSA piston and mine is Triumph, but it works just as well.:smile: Ron
M20-055

email (option): ronpier@talk21.com

Re: New clutch item Robb Nortier.

I surely would not want to claim anything, I see it more as a contribution for the sake of the owner/restorer and as a tribute to our great machines and also to do something in return for all the great advise here given so freely.

The more of these tools are available the better as it saves lots of strips threads and cursing.:relaxed:

Now and then I am making a small batch of these spring compressors and for a moment didn't like them to be seen as copy's or even steals of Robb his tools.

But on second thought, no problem...who cares...happy new year!

Re: New clutch item Robb Nortier.

Probably the feltring and corkbush gets more function when the long bush in the sleevegear gets worn and more oil will seep through...

Lubricating the long sleeve bush seemed to be a difficult problem, weak point in lots of designs. Hard to get oil there and too much oil will easily work out. Maybe a modern O ring seal in a groove at the end of the bush will do nowadays ???

A few weeks back there was a topic about different mainshafts....compared a few and one difference I found was in the pattern of the oil grooves/spirals over which the sleeve gear runs. Looks like BSA acknowledged this lubrication problem early.

Re: New clutch item Robb Nortier.

Interesting about the oil groove...I posted about potential main shaft differences when I spotted different part numbers but have yet to get all mine out and do some comparisons...I was hoping someone might know the answer...Personally, I wasn't aware of any potential differences until recently and I've handled scores of them over the years!!...

Lubrication design issues aside, I find the quickest way to destroy the sleeve gear bushes is not to maintain the gearbox oil at a sufficiently high level...With the standard set up and no sealed bearing, particularly if the field stand is used, the oil level can drop to critical levels in just a few hundred miles...I recommend a check every 300 miles...I'd be interested in anyone else's view on this....Of course with the sealed bearing fitted the situation is much improved and that should be considered a 'must have' modification at rebuild time...Ian

email (option): ian@wright52.plus.com

Re: New clutch item Robb Nortier.

Yes, indeed. I am very sorry for that. My first attempt was not as sleek as yours. I humbly apologize my friend and thank you for this opportunity to set it straight.

email (option): britool51@hotmail.com

Re: New clutch item Robb Nortier.

BRILLIANT!!!!!

email (option): britool51@hotmail.com

Re: New clutch item Robb Nortier.

Cheers Robb, good luck !

Re: New clutch item Robb Nortier.

Hi Michiel W. Thank you for your kindness in accepting my apology. What country are you in? I have a gift for you and want to tag it.
You are a true gentleman, and you have taught me a great lesson. Cheers, Robb

email (option): britool51@hotmail.com

Re: Michiel

My Friend, it is your design and I have erred. I am deeply sorry.

EVERYONE........ The clutch spring compressor is Michiel W's design!

GET ONE AND SAVE THE NEIGHBORHOOD FROM THE RANT IF YOU DO NOT USE IT!

email (option): britool51@hotmail.com

Re:

No need for that, Robb.... sorry, I regret bringing it up.....

Just reading you had a gift for me, but there is no need for that either..

Cheerio and good luck with your bikes & tools. Michiel

Nieuwe pagina 1