Questions? Looking for parts? Parts for sale? or just for a chat,

The WD Motorcycle forum

WD Motorcycle forum
Start a New Topic 
Author
Comment
View Entire Thread
Re: Help to fit the fuel tank

The drawing from the parts list shows the special front mountings (cup, top hat, rubber and bolt) Les at Russells also has these with 'original' rubbers.
And this from Draganfly
https://www.draganfly.co.uk/index.php/component/hikashop/product/4843- Ron

Scan-20190805-2

email (option): ronpier@talk21.com

Re: Help to fit the fuel tank

On my M21 i have to fit the tank before fitting the seat.

email (option): hanshyphenmortenattsovikdotnet

Re: Help to fit the fuel tank

Thanks for your help... I saw Draganfly, but there is a rubber rectangle as a spacer, it doesn't seem right because I have a rubber cylinder with a photo in the center, like a sort of spacer.
In the first image the image of Draganfly is in the second image of my rubber.
I don't know how to mount everything or if I have the wrong parts ... But I think it needs that thick round rubber.

Thank you



https://imgur.com/UEocSbM

https://imgur.com/LnhSF5F

email (option): bongiovanni1988@libero.it

Re: Help to fit the fuel tank

You have the correct rubber fo the rear mounting. The rubber goes between the bracket on the frame and the tank.
I found it difficult to insert the mounting bolt through the rubber spacer so cut a chamfer round the opening to the hole.

Re: Help to fit the fuel tank

The Draganfly list quotes for the B-C and M models so you need to click on the correct numbers for M group to see pictures of the parts.

The parts list gives:-
66-8089 bolt
30-659 washer
36-4140 rubber thick
66-8091 rubber thin

Draganfly say that the thin rubber goes between the frame and tank and the thick rubber is under the frame.....I always thought it was the other way round, but I stand to be corrected! Ron

email (option): ronpier@talk21.com

Nieuwe pagina 1