Remove outer cover. Inside top right is an adjuster rod, wind it out half a turn. Worked for me.
Ian,
2 things about your solution to the problem.
1. The rod is sligtly bent, therefor can't be turned half, only fully - one time.Is that OK ?
2. If you do so, is there the risc you can't reach 4th gear anymore..?
Sorry I didn't make it clear. remove pin from clevis on the straight end of rod turn clevis out half turn. This will push the selector better into first gear. This was all I needed to engage first without altering the other gear selections.
Ian I'm hoping that what worked for you may work for me so I'll have a go next week. If not, as I don't have a winter project the gearbox will be it! I can live with it until then.
Ian I'm hoping that what worked for you may work for me so I'll have a go next week. If not, as I don't have a winter project the gearbox will be it! I can live with it until then.
Let us know if this works, Mike.
Very interesting !
