A Few months ago I purchased a complete set of Newnes motor cycle repair and upkeep, 14 weekly parts published in 1932. They cover all the old British bike manufacturers from 1914 to 1931.
These were very expensive to purchase so I have digitized all 14 volumes and the timing charts that came with the magazines so I could share them all with everyone on the forum. I have already sent out a link to a few friends a month ago but will now open it up to one and all to enjoy. There are 2 Wetransfer links below if you past and copy each one you can then download the PDF files, they are large and will take some time but well worth the effort. The links will be valid for one week.
Hi Stuart
Thanks for making them available – A fantastic amount of general information – I especially liked a comment that “engines with removable heads makes maintenance easier”
Thanks again
Cheers All
Doug W
Huge thanks Stuart
that must have taken some time and effort to do. Very generous and kind spirited of you. I shall really look forward to reading them.
To answer your question Dean a total of 6 hours scanning.
They seam to be hard to get so the price is high, I picked up this set for just over 200 pounds, so I thought if I digitize and make it available free it may bring down the cost of the original ones for others.
The Magazines are only 6 x 9 inches in actual size.
Add another thank you to the list.
I doubt it will make any difference to the prices though.
When periodicals get that sort of age they enter the domain of the paper collectors.
Most of them do not care about the information inside it is the age & condition of the paper.
In the old book market things like BSA riders handbooks will fetch well over $ 100 if they are in pristine condition.
I have seen them change hands for better than $ 200 and a BSA riders diary which was part of the kit when you bought a de-luxe version went for over a grand, I dropped out at $ 150 as there is no more BSA information in it than the std riders handbook.
Thank you Stuart for taking the time and the sharing these. They are a look into the past to see how ordinary people repaired their motorcycles in the day. Seems to be a lot of use with hammers, but if a hammer is used at the correct place with a correct strike then the desired result can be achieved. Things are done a little different now but times have moved on and most of us can either afford better tools and pay for services from a proper machine shop.
I have known about these mags but never looked through one. They have some great information in them on rare bikes like the narrow angled twins and fours from Matchless plus rare OHC info. The timing chats are very useful, thank you again Stuart.
Thank you Stuart for taking the time and the sharing these. They are a look into the past to see how ordinary people repaired their motorcycles in the day. Seems to be a lot of use with hammers, but if a hammer is used at the correct place with a correct strike then the desired result can be achieved. Things are done a little different now but times have moved on and most of us can either afford better tools and pay for services from a proper machine shop.
I have known about these mags but never looked through one. They have some great information in them on rare bikes like the narrow angled twins and fours from Matchless plus rare OHC info. The timing chats are very useful, thank you again Stuart.
Tim W
It actually goes towards something I am regularly on about.
We fuss & fiddle with the bikes now days when in the period they got a whack from the hammer then off to work.
Some of the timing details look a bit suspect
I would just like to add my thanks to Stuart for taking the time to scan the booklets. Very informative and interesting. A window into the practices of a bygone time.