I am finishing the wires on the 44 16h can someone post a photo or two showing the proper way to runs the wires from the horn pusher to the lamp and to the horn


cheers steven

email (option): goodbell@ripnet.com

No images sorry, but normally loose wires outside the loom that was contained within thin rubber sleeving..............

I never bother to recondition period horns fitted as after all that effort and expense a fairly pathetic note...............better to fit (for safety) a cheap and modern 6V Jap or Chinese horn on the top frame tube that is always decibels louder than the original, is hidden, and for the sake of originality run dummy wires through to the original horn.........works for me every time...........

I don't know if this picture is any use to you, this is how I routed it. I reconditioned my horn and it works well with a nice low tone. It took a bit of messing about with shimming with gaskets and bending of the diaphragm to get it right.

%%htmlItem_1%%

email (option): horror@blueyonder.co.uk

Thanks for the info that is something like I has thinking of

Cheers steven in Ottawa

email (option): goodbell@ripnet.com

Ars the wires leave the terminals on the Alette, they should be routed through the little hole in the iD tag, before going up the frame.

email (option): deadsheds[at]yahoo[dot]com