i have seen a picture from a wm20 that was attached with a clip on the girder to fit the speedo cable,on this picture i can,t see good how it looks like.
if somebody have a picture from the clip only it would be great.
i have already made the clips for the rearlight cable that sitting on the horizontal tube that goes to the rear mudguard.

email (option): roy206@hotmail.com

Hi Roy,
I think this is what you are after.
http://pub37.bravenet.com/forum/static/show.php?usernum=3155626639&frmid=16&msgid=1277956&cmd=show

Dave

email (option): jeepfinger@blueyonder.co.uk

yes it is , but the clip 66-9113 is not pictured,i guess it is like the shamrock pattern.......

email (option): roy206@hotmail.com

I did notice that there wasn't a photo of that clip Looking at the photo I guess that it must spring open to fit around the fork leg, it also looks like you could have a cable each side. Henk posted the thread, he may be able to shed more light on the subject, wouldn't mind some clips myself.
Dave

email (option): jeepfinger@blueyonder.co.uk

i find a picture from a clip that looks nearly close.
i am going to make one.
let you know when it is allright

email (option): roy206@hotmail.com

Hi Roy,
Go for it
All the best,
Dave

email (option): jeepfinger@blueyonder.co.uk