If anyone has a Flying Flea, can you please measure (pretty accurately) the distance from the spindle to the top of the mudguard. I just tried to order some mudguards from Autocycle engineering and they said they need to know the exact measurement (just saying it is for a 19"rim won't do)They also said that the front and rears may have a different radius, so if anyone can check I'd be grateful as I'm trying to get them ordered tomorrow to tie in with another mudguard I have to order

email (option): davmax@ntlworld.com

Hi Dave

Will look for you this evening give you a pm
Cheers
Bram

email (option): Bram@ockhuizen.com

Thank you both to Bram and Jan for the replies, the radius of the guards is 14 1/8" on the front and the rear is 14 1/2" the width is 3 7/8" and the section is a "C" section measuring 1 1/2 " in depth. Which on original ones tend to flatten out very slightly at the front, but I'm not sure they are meant to, but this may be down to damage that has been straightened out that has happened over the years. I thought I'd better post the results just in case anyone else needs the measurements

email (option): davmax@ntlworld.com