Look what I just bought here in Holland. Let me know if there is anything you need for your projects.

Henk.

email (option): ahum@quicknet.nl

Nothing marked LV7/NC, I assume ?

Got any Norton head gaskets, Mister ?

Not sure I'll have a look.

Henk

email (option): ahum@quicknet.nl

Cheers Henk.

By the way, those speedo drives must be worth a fortune but the price is probably still going up. I'd hang on to them for a while if I were you.

Hey Henk, would that spark plug cap be for sale? And whats in the Lucas boxes?
Cheers, Mick.

email (option): mick@motorbikemike.org.uk

Hi Henk...gearbox filler plug, Valve guides..(pair), Clutch sprocket if it's NOS, Brake cams/spindles (two) if they are NOS...possibly more when the contents of the boxes are revealed.. ...Ian

email (option): ian@wright52.plus.com

I could use the knee pad plates (with screws if you have them), and a box of the misc hardware to mount fenders, oil tank and brake stop bracket. The washers for that actually. The proper fasteners to mount the volt reg., and the front mudguard spacer.

Also, the front wheel felt washers (rings), a dyno cover & ring. The cover must have that little thing that holds to wires in as that's what I am missing.

Trinkets really.

Cheers

I need really good pics of that spark plug cap. Rik, if you get it, can you help there?

email (option): britool51@hotmail.com

Hi Henk have you got front and back wm3 wheel rims?
if so how much and what price on the lifting handle and bottom engine cover and have you got gear indicator plate? thanks keith.

email (option): wheel rims

Henk,

How much for the engine sump plate ?

John

email (option): john.kater@chello.nl

Hi Keith,

I have no wheel rims. The lifting handle is 20 euro, it's in very good conditioin but it does need a little repair, two holes have to be closed up. I can send you a photo if you are interested. It's an original lifting stay. The sump guard is probably sold. No gear indicator plate I am afraid.

Henk.

email (option): ahum@quicknet.nl

Hi thanks can you post to it to the uk? and how do you what paying? cheers keith.

email (option): keithsprague@hotmail.co.uk

Hi Henk,

I emailed you directly.

cheers,
Scott

Hi Henk Id be interested in buying those front fork links and steering damper parts from you . Regards , Leif .

email (option): leifevans75@yahoo.co.uk

Hi Leif,

These fork links are gone already. I do have some steering damper parts. What do you need? Better email me direct.

Henk

email (option): ahum@quicknet.nl

Hello Henk

I could sure use a dyno end cover

thank you

John M. Bierens
Wichita Kansas

email (option): bierens@sbcglobal.net

Hi Henk . Sorry it took me a while to get back to you . What I need most of all is the inner and outer cones for the steering head bearings . Do you have any of these parts in new or good condition? Regards , Leif .

email (option): leifevans75@yahoo.co.uk

Hi Henk
That rear wheel in photo 6, is it a QD hub rear wheel?. Can i have it for free cause the shipping to NZ is huge. I'm a really a nice guy, really just ask my wife,mmm ah maybe not.
And one of those mag end caps would be good too.
"Go the all blacks"

email (option): wpgarage@xtra.co.nz

Hi Phil,

Yes, you can have that wheel for free. Shipping would be 200 euro.

Henk.

email (option): ahum@quicknet.nl