Questions? Looking for parts? Parts for sale? or just for a chat,

The WD Motorcycle forum

WD Motorcycle forum
Start a New Topic 
Author
Comment
View Entire Thread
Re: Timing Cover

I thought we decided in an earlier discussion that the breather, drilled and undrilled was introduced during or before the war?

Rob

email (option): robmiller11(a)yahoo.co.uk

Re: Timing Cover

The breather was located in the timing cover on the models detailed from 1948...
Earlier models such as the later WB30s also employed the breather in that position but not with the winged logo...Earlier B31s had the breather behind the main bearing in the drive side crankcase..Later pre 48 models had it in the crank case as on the M Series models...None before 1948 used the winged logo and later font style..

In this case it's the particular combination of the various features that make this cover post '48...Ian

email (option): ian@wright52.plus.com

Re: Timing Cover

I guessed that the logo would bake it post war. So it could have been for any of those bikes listed, not just one model.
Thanks.

email (option): richardpurkiss@hotmail.com

Re: Timing Cover

OTOH it fits
so if that's the only one you have then ride with it on
Sooner or latter some one will tell you it is wrong ( that will make them feel happy ) and with a bit of luck they or some one else will have a correct one.
Over the years I have scored dozens of parts that way, all you have to do is be polite and waste a few hours talking to people who walk over to have a chat . About 1 in 10 will have some thing worth while to say.
We were sitting ata McDonalds one day & a bloke came over to have a chat
HE had 20 old bikes a tennant left behind on his trailer about to go to the tip .
Of course they never made it there and the entire lot had several very rare cycle motors worth thousands .

Re: Timing Cover

I dont go to auto jumbles that often, so what is something like this worth nowadays ? Its superfluous to my needs so does not need to sit on my shelf!
Richard.

email (option): richardpurkiss@hotmail.com

Re: Timing Cover

There are similar covers on ebay...You can get an approximate idea of value there..Ian

email (option): ian@wright52.plus.com

Re: Timing Cover

Thanks. £20 - £30 in reality then.

email (option): richardpurkiss@hotmail.com

Nieuwe pagina 1