Hi Ron, yes this will help. do you also know what the numbers at the midsection mean...I see something like 2.781 CRS at the left of the drawing and some unreadable numbers near the midsection..

email (option): arnoldovertoom@gmail.com

OK Arnold. Forget that previous drawing. I've checked against my forks and I'm pretty sure these are the correct dimensions. I altered the centre measurement it's 5 11/16" and not 5 11/32" as I first thought. (CRS = between centres) If you have the short forks subtract 1/2" (12.7mm) from the 17 1/8". Ron

email (option): ronpier@talk21.com

Hi Ron and all

This is great, now I understand a bit more and will check my girders and make a new plan for the to get them as-straight-as-possible again

Thank you, Ill let you know when next step can be makde inn this process

Cheers
Arnold

email (option): arnoldovertoom@gmail.com

Thanks for sharing Ron

Job

email (option): Jonnyob1atgooglemail.com

Lex has straightened up the drawing and typed in the dimensions for me. So much nicer for anyone who wants to save it. Ron

email (option): ronpier@talk21.com

Got a pain in my neck looking at that Ron!:joy:

Cheers,

Lex

email (option): welbike@outlook.com