WD Motorcycle forum

Author

Comment

Jul 7, 2024 - 2:58PM

Re: Install of throttle and choke cable

That's good to have & thanks John

I did come across something similar while looking online earlier from the
Hitchcocks motorcycle site...

email (option): rwalsh53@gmail.com

Matty Leahy

Sep 16, 2018 - 9:24PM

Re: Install of throttle and choke cable

If it's for an M20, outer cable lengths are listed in the technical section.

Prinsen

Sep 17, 2018 - 9:53PM

Re: Install of throttle and choke cable

Those i did find but then it was still guessing for the inner lenght. But i also got those. Appearantly those measurements are states in the 1939 parts list

Rod

Jul 7, 2024 - 12:45PM

Re: Install of throttle and choke cable

Hello, I was wondering if you could let me know the inner / outer throttle cable length. I did see the outer length on the forum page but I am having a problem with fitting mine and I have a feeling my inner cable is too short, ta

email (option): rwalsh53@gmail.com

Roddy Walsh

Jul 7, 2024 - 3:20PM

Re: Install of throttle and choke cable

https://accessories.hitchcocksmotorcycles.com/Throttle-Cable-Amal#

I'm not sure how to paste an image here, so that's the link to the site

email (option): rwalsh53@gmail.com

Ron Pier

Jul 7, 2024 - 4:04PM

Re: Install of throttle and choke cable

This Rod:-
We have produced a range of throttle cables in various combinations of inner and outer lengths which should suit a wide range of motorcycles, not just for Amal carburettors. The cables are manufactured in England, have a nylon lined outer cable and have an in-line adjuster in the cable approximately 6” from the handlebar end with rubber covers.
Use the picture below to identify the cable you need. We have listed the total length of the outer cable and the length of free play (the free play is the amount the inner cable can move with the in-line adjuster at its minimum), the nipple size and the typical Amal carburettor that the cable is used with.

email (option): ronpier@talk21.com

Roddy Walsh

Jul 7, 2024 - 4:20PM

Re: Install of throttle and choke cable

Yep...

email (option): rwalsh53@gmail.com

Roddy Walsh

Jul 7, 2024 - 4:24PM

Re: Install of throttle and choke cable

I managed to carefully nibble a bit off an old cable that I had and thanks to Dr. Dremel, such a fantastic device, all good to go 👍

email (option): rwalsh53@gmail.com

Mark Cook

Jul 8, 2024 - 10:00AM

Re: Install of throttle and choke cable

These fit and I am using them.

https://pesltd.uk/?product=66-8899

https://pesltd.uk/?product=66-8882

Lengths are listed too.

Mark

email (option): pes.sales@btconnect.com

Ron Pier

Jul 8, 2024 - 11:45AM

Re: Install of throttle and choke cable

Mark there is a slight problem with your website. When using the search box, It seems that unless you type in exactly how you have listed an item, it says " No result" For instance I typed in WM20 throttle cable. "No result"! This has happened to me on several occasions, even though I know you stock the part, I can't find them?? Ron

email (option): ronpier@talk21.com

Mark Cook

Jul 8, 2024 - 4:54PM

Re: Install of throttle and choke cable

Sadly, it's only a one-word search engine. Or exact phrase.
I've asked for some simple Boolean to be added. (and or)
But the chap can't do it!
Free google pushes their own adverts
Advert free is too expensive.

Part numbers work.

I'll bully him again, there has to be a better way.

Mark

email (option): pes.sales@btconnect.com