Josh, this is a photo of a bolt fitted to a NOS spare frame I have.

It matches the parts list diagram - 7/16" x 4 3/16" and is 20TPI cycle thread. The original washer is a a double spring washer.



The head steady is on the right as you say - here is a picture of one if you want to cobble something up?

email (option): rays54@hotmail.com

Fantastic Ray, thanks very much..:)

email (option): johnsonjosh@icloud.com

Josh the hex for 65-6794 is aprox .6" (5/16W spanner) The threads are 5/16 x 26tpi.

But if it's easier. Drags have them. https://draganfly.co.uk/shop/73364/stud-nut-lifting-handle-and-carrier/#65-6794

Ron

email (option): ronpier@talk21.com

Cheers Ron, ill be placing an order with them shortly so will add them to the list..thanks mate.

email (option): johnsonjosh@icloud.com

if it helps

https://pesltd.uk/?ptno=65-6794

Mark

email (option): pes.sales@btconnect.com

Mark,

Even better that you have them, i will be placing an order for some valve train components in the coming week so will add them.

Another one for you, i sent you an email last week but have not had a reply.

Im chasing a full set of cylinder head bolts and washers for my M20 steel cylinder head, i see that you do the set for the Aluminium heads, do you have anything available for the steel heads..beleive its just the length of some of the bolts that changes?

cheers mate

Josh

email (option): johnsonjosh@icloud.com

Thanks Josh,

When I run some more head bolts I'll include some for the Iron heads.

Mark

email (option): pes.sales@btconnect.com

Cheers Mate,

I’ll flick Anita another email and get my name down for a set.

Regards

Josh

email (option): johnsonjosh@icloud.com