Hi again,
I’m wondering if anyone has encountered this problem:
My rear brake sprocket hub is rubbing against the brake plate and making an annoying grinding sound when the wheel is turning. I’m guessing they shouldn’t be touching but can’t figure out how to separate them.

Things I’ve checked: right side spacer is correct (0.58”), new modern bearings with the 2 cup spacers machined down to compensate for wider bearings as recommended on another thread.

Is there something I’m missing?

Thanks

email (option): Micah.leinonen@gmail.com

Have you got 15-7047 spacer in place? It's very easy to forget.
It goes on the inner bearing sleeve 15-7046 before going through the bearings.

Mark

email (option): pes.sales@btconnect.com

Yes, and I’ve confirmed it’s the correct size aswel.

email (option): Micah.leinonen@gmail.com

I've often had to fit a thin washer (shim) under a brake plate to eliminate any touching. Ron

email (option): ronpier@talk21.com

I did that today and it worked. After 7 years my bike is officially complete and riding beautifully. 🎉

email (option): Micah.leinonen@gmail.com

Pictures?

email (option): pes.sales@btconnect.com

https://ibb.co/J7qD79S

email (option): Micah.leinonen@gmail.com

email (option): Micah.leinonen@gmail.com

Looks good Micah, thank you for sharing.

Mark

email (option): pes.sales@btconnect.com