Re: Fitting pannier frames and they are not playing nice!!
Bit of an updates chaps!
After an afternoon of slacking nuts off, lots of standing back and squinting I have two issue to address before I can continue with fitting these frames as they should be.
1, one of the two brackets that bolt into the top of the mudguard is longer than the other by about 1.5 times the thickness of the metal.
2, the carrier is twisted and to be honest I think this is the majority of my problem.
So off it all comes again to apply a little persuasion (possibly involving the map gas)!
I will report back on the results when these two are resolved.
Re: Fitting pannier frames and they are not playing nice!!
Sorry Ron,
Yes M20
Going to follow Marks advice and slacken it all off.
I did email some pics to Jan who suggested may rack may be twisted, so I will start with that and see how it goes…
Re: Fitting pannier frames and they are not playing nice!!
Having removed the carrier I have decided that my best plan is to replace the repaired mounts as no two are the same length or position on the carrier. Can you please tell me the distance between the carrier and pannier frame on your WM20 machines.
Thanks in advance, so many variables!!
