I have a mate who has offered to make for me all of the bushings needed for th M20 box, if I can provide him with drawings.
Are drawings available, or at least good measurements ? I have searched google etc and this site.

Baz

email (option): binnawan@iinet.net.au

I haven't seen dimensioned drawings for the bushes...Ian

email (option): ian@wright52.plus.com

If your unable to find any Barry, this is another way out.

https://pesltd.uk/?product=24-4223
https://pesltd.uk/?product=24-4241
https://pesltd.uk/?product=15-4226
https://pesltd.uk/?product=66-3155P
https://pesltd.uk/?product=66-3211
https://pesltd.uk/?product=66-3155
https://pesltd.uk/?product=66-3214

Mark

email (option): pes.sales@btconnect.com

Hi Baz

I've sent you a mail with the information that I have. (cant attach a pdf to messages here...or is it possible??)

cheers
Pete

email (option): petercomley@web.de

Any bush dimensions would be a useful addition to the Technical Section...Ian

email (option): ian@wright52.plus.com

Thanks Pete, that's very helpful.
Baz

email (option): binnawan@iinet.net.au

Hi Ian

I have been trying to get around to sorting the info I have collected on the gearbox, bushes etc, into some sort of intelligible form, in a single document, that could be added to the tech info, for some time.

Your comment has finally prompted me into doing so.

As almost all the info has been nicked from this and other sites, and a great deal provided by yourself, I would be grateful if I could first send it to you for checking, to make sure it all makes sense, and any additions you may suggest.

Cheers
Pete

email (option): petercomley@web.de