Questions? Looking for parts? Parts for sale? or just for a chat,
The WD Motorcycle forum
I have used Brickwood Wheel Builders. Old Brickwood Farm. West Grimstead Salisbury. SP5 3RN. 01722 712701. Much better since the new guy took over a few years ago.
Hi Ian...That's who I have used for at least the last 6 or 7 projects...Unfortunately he has now retired from wheel building...Can't blame him though, I'm retired myself and have had to turn down a lot of people who wanted their engines/gearboxes rebuilding...We all have to do it sometime I guess!....Ian
email (option): ian@wright52.plus.com
Are you sure the guy with the beard retired but a younger guy I think his name is Dave who lives in Poole took over. It was he who did my last wheels. The web site is up and running. Have you phoned the number to check.
Yep that beardy bloke with Jesus sandals did a great job of my Autocycle wheels and found enough original and correct spokes amongst his stock. I didn't know he'd retired. Be handy to know about the new guy as I'm in Poole also. Although I've got Adam in Poole too. Ron
email (option): ronpier@talk21.com
I didn't realise anyone new had taken it on after the 'beardy guy' retired...If the new man's as good as him I'd be happy to use him...Ian
email (option): ian@wright52.plus.com
When I had my wheels done by him he said that the guy he took over from had run the business down and that he was going to do his best to rebuild it. He did attend Kempton a few times after he took over.
Getting some odd computer returns for the address and postcode for this company. The sites seem to be the same as 'Sailsbury Wheel Builders' near Ringwood. They must be linked ?
email (option): richardpurkiss@hotmail.com
Doug ( the founder ) sold Devon wheel Co some time ago. He continued building wheels ( and making spokes ) . The last job he did for me was 3 years ago, which was also a 600cc single. His website is still working.
Cheers Pat
I have been lacing and balancing my own wheels for a number of years now. I don't really understand the 3 vs 4 spoke crossover. As far as I have been aware, there is only one pattern if the spokes are correct for the drillings in the rim. ie they won't fit any other way.
I take photos of the wheels before stripping them down and measure any offset. Then I loosely lace together on the bench. Once the angle of the holes has been worked out lacing is easy. Screw up all of the spoke nipples roughly the same but do not tighten them.
I usually set up using the wheel spindle and some spacers to take up any lateral movement. Clamp in some aluminium jaws on my big vice and then use a DTI on a magnetic stand to get vertical and horizontally true. This takes a little practice but is not difficult. I can usually get them within 0.5mm with new rims. Old rims which might not be so true are ok to get within 1.0mm. Building in an offset takes a little more time but I find the whole process very satisfying.
As mentioned it is with finding where the rim has been welded together as this spot often has a little wobble in it when truing up.
After tightening all of the spokes and checking again for trueness, I go round and 'ping' all of the spokes with a screwdriver or small spanner just to make sure they all sound the same. Any that don't can be tightened/loosened until they do.
Tony.
email (option): tony-wilkinson@sky.com
I'm continually dumb founded by the debates over who can or cannot do a certain thing on ones bike.
Over here in the States, we do not have such a wealth of services and suppliers available, so if I want to build
a bike I have to learn the arcane arts myself.
I use Chris from Willis Wheels (www.williswheels.co.uk) for my supplies from spokes to rims. He has always been very fair with me, and went
so far as to encourage me to try my hand at it. As I have learned from experience, the hub geometry dictates the
cross overs and offset. Amazing what the engineers did back then! They make it so simple that anyone who really tries
can build a wheel. I bought a wheel build stand from eBay, and have built dozens of wheels.
A magneto builder is also rare. I did the research, and built a re-magnetizer and found out how simple these are to do.
Same with the dynos. Piece of cake.
The same with painting and body work. Just get yourself some equipment and go to town.
For me, the joy of having hand build EVERY component I can is the essence of a restoration. Why pay someone else to do
what you can do? Sure, you have to invest in tools and equipment but so what? Get the payback by doing your mates stuff.
As a 70 year old retiree, I have made some nice supplemental income providing these services to other enthusiasts. I don't charge
much as it's a fun hobby and it pays for the parts I need.
Really mates, if someone else can do it, so can you!
email (option): britool51@hotmail.com
Unfortunately you assume that everyone has your technical ability. You are very lucky. Most people work to their own abilities. I personally could do most of which you refer too but where would I put all the equipment.
Back when these bikes were new and particularly when they were sold off post war, money was tight and dad did all of the work on his bike, usually in the street or perhaps in the luxury of the laundry shed where a least it was dry & the copper could be fired up to keep it warm enough to work in winter wearing only a surplus great coat for warmth..
Now there working class men ( and women ) generally had a very basic education and few of them were geniuses.
MY dad fixed all of our shoes, heels soles & even stitching, did all of the plumbing, drainage & sewerage required on the house and built 3 rooms in brick on the back after excavating 30 tons of sand stone with nothing more than a spud bar, star drill & mash hammer.
HE did all of the electric wiring, fixed the gas stove & occasionally the vacuum cleaner & fridge.
He built nearly all of the furnature ( it was all wonky but it worked ) and would occasionally tackle the TV.
And dad was as thick as two short planks, left school at 8 so had no formal education to speak of, enlisted in the first call up but was considered too physically poor ( bad eyes & poor hearing ) to be sent overseas so spent 5 years in the kitchens where he learned no transferrable skills, apart from how to bake 2000 bread rolls and to peel potatoes when 1/2 boiled and the skins fall off.
Now days we have been brainwashed that everything apart from wiping our bums is a specialist job that requires a graduate with 20 years experience
There is nothing difficult about lacing a wheel and there are hundreds of You tube videos of how to do it.
Now it might take 9 attempts before you get it right but that is what learning on the job is all about.
And like dad I do all of the wiring in the house which was funny because down here you have to get the wiring certified before you can sell a house.
The electrician turned around to SWMBO and said "your hubby did this house didn't he "
She claimed not to know and asked what needed to be done
"absolutely nothing" he said, " I have not seen wiring done this well since I finished my apprenticeship in 1962"
My only tip is some thing a friend brother showed me when I was in primary school and had to put a new rim on my pushbike.
He ran some masking tape around both sides of the dimples on the wheel before we pulled it apart and numbered all the holes
1a, 1b , 1c, 1d, 2a 2b 2c 2d and so on as the lacing pattern repeated itself every 4th spoke.
So if the rim is still spoked do that and start from the valve hole then pull the tape off & transfer it to the new rim .
I have found it a whole lot easier to hang the rim from the cloths line then work fore forward & backwards remembering the spokes that cross over inside need to go in first .
Mark the hub with a rotation arrow.
I rather like Jans job with the coloured lines so perhaps photograph your wheel from each side then over mark each type in a different colour
Trevor, I would have LOVED to meet your dad! I hope he also taught you.
email (option): britool51@hotmail.com
Hi Ian, One learns by studying and doing. Yes, I'm an engineer, but, and you are right, some things do come easily to me.
My take is still this, Nothing ventured, nothing gained. The equipment doesn't take that much room either.
I hope others will take a stab at doing it him/herself. It's like asking that gorgeous girl out back in our school days.
If you don't ask, the answer is NO! If you do, it's 50/50 odds. So, nothing ventured, nothing gained.
My Division Officer in the Navy said if you do not learn something everyday, you might be dead!
Have fun mate.
email (option): britool51@hotmail.com
Hi Robb. I agree that you can learn a lot by watching and studying. That's how I learnt about cars and bikes. I learnt a lot from my father, but not about motors which he knew nothing. I did spend 26 years as an AA patrolman and I am like a lot on this site old school, so will turn my hand to most things. Some people do not have the aptitude to do what we do and allowances have to be made for that. I have learnt a lot since coming on this site.
I doubt that many wheelbuilders would be able to stay in business if they were only component retailers, added to which they would have far less practical knowledge of the products that they sell.
I certainly don't feel guilty about supporting tradesmen in the knowledge that they will provide quality work and advice.
Things can and do go wrong and some of the parts that we're working with are quite hard to find....Better in my opinion to find one's own comfort zone and expand accordingly...Not to assume that just because someone on the internet says that it's not difficult, it truly isn't.
Have a walk along a row of disc-braked Norton Commandos and see how few have managed to centre the front rim as it should be. They're a sod of a job quite frankly and one has to know one's limits.
Done methodically and with spokes of the correct type, wheel building isn't a black art....but if spokes are the wrong length or wrong head angle, or perhaps most commonly, incorrectly pierced rims are supplied then the result can be downright dangerous if the necessary skills aren't available.
Let's go get a nice cold pint Ian Clare!
One way to understand the spokes is to look at "Over" spokes, and "Under" spokes. Think about it...
email (option): britool51@hotmail.com
Hi Robb the cold beer idea is very good. At the end of the day I have no interest in doing my own wheels All my needs have been met by supporting a small business. We are lucky here in Britain in that we have people who can still do some of the jobs we want. Like Ian Wright making hard to get parts.