['Either way whats the part number of what I should use? I cant seem to find the correct number at the moment...']
There's no part number for these non standard parts as the bearings have to be altered to suit the application...
They are therefore just sold by description...The ball bearings do not require any modifications to the frame to enable fitment. I've never used the tapered versions personally so couldn't comment on that aspect....If you elect to go for taper bearings remember they must be fitted with some pre load, not free play....Ian
['Either way whats the part number of what I should use? I cant seem to find the correct number at the moment...']
There's no part number for these non standard parts as the bearings have to be altered to suit the application...
They are therefore just sold by description...The ball bearings do not require any modifications to the frame to enable fitment. I've never used the tapered versions personally so couldn't comment on that aspect....If you elect to go for taper bearings remember they must be fitted with some pre load, not free play....Ian
" Supplied by Ian " as per Ron's post ..... Is that you Ian ... How do I get a set of the fit and forget bearings?
