Hi Ron, an update for you, I sent the speedo to Philip Woods for a new glass and a recondition, he confirmed to me that it requires a pin drive cable, , someone had fashioned an adapter for a square drive cable. He put me on to JJ Cables who I will contact shortly, hopefully I’ll get to the bike shortly and fit the parts , I’ll post my findings. Best regards Neil
Hi neil. Yes I posted contact details for Dave at JJ Cables in and earlier post. To save you phoning him about the length, this is how he will advice you:-
Mount the speedo and with a tailors tape, measure from the ends of the threads on both speedo and gearbox ie the outer cable length. Tell him that's how you measured it and he'll know the rest. Ron
