The rear tank mounting bolts on my bike are drilled for locking wire. I don't do this, the bolts are checked regularly & are always nice & tight. But is it considered good practice to lock them?

I don't wire them or even use Loctite, but you might consider the last.

email (option): michasteinmann@gmail.com

I've never wired them either...The bolts tighten against the shoulder of the shank and don't seem to come loose...

When making replacement bolts or fitting pattern ones, take care to ensure the threaded section is the right length as they can pierce the bottom of the tank if too long...Ian

email (option): ian@wright52.plus.com

Thanks for the replies. I'll keep things as they are. As for screwing the bolts in too far, I've never done it but I know someone who has...

Hi All.
If different tank bolts are used in front tank bolts points, if long they will wear a grove in head stem making it very weak.
Sorry if of tap on this one, but i have had one fail on me for this reason.
Cheers Drew

email (option): bronte.nolan@bigpond.com