Both my foot rests were bent up and back. I turned an arbor to fit the mounting holes, clamped the arbor in the vise, heated the mounts with an oxy/ acetylene torch and using a couple of adjustable wrenches, bent them back to their approximate original positions. The edges were also ground from the previous owners falling off, I built those up and ground them back down to about what they would have originally been.
Well in keeping with the previous post regarding the outcome of the issues being solved i can say that after studying the angles i took the footrests to the shop next door to me where they have a large vice and oxy acetylene and proceeded to bend them to where i thought they should be only to find out that after installing them they are still not at the right angle so..... when im ready i will take the bike there and do them on the bike...... honestly they looked correct in the vice ha ha