Questions? Looking for parts? Parts for sale? or just for a chat,

The WD Motorcycle forum

WD Motorcycle forum
Start a New Topic 
Author
Comment
View Entire Thread
Re: Forum wisdom required....

I have an October 41 project bike which had
Short forks
Bakelite side damper knob
Brake rod
Ribbed rear mudguard
Balloon tank
8” headlight
Standardised levers
No footrests but possible to use solid or rubber as the changeover took place then
Rear frame had no footrests
Rear frame had side stand lug

Although built in 41 - the frame no sequence was from mid 1940
Early parts - some - appeared later than some of us may think

Br
Jo’b

email (option): jonnyob1@googlemail.com

Re: Forum wisdom required....

John would your frame number be earlier that that quoted by Henk?

Ron

email (option): ronpier@talk21.com

Re: Forum wisdom required....

https://ibb.co/VQF60MT

Am I right in thinking that the speedo drive would be on the left as on the later bikes but still having the rod front brake, therefore no brake cable adjuster "post" on the plate.
Mike W

email (option): mickwalsh57@gmail.com

Re: Forum wisdom required....

Hi Michael

Left mounted speedo was introduced with 1940 W models in Late 1939

Speedo remained centrally mounted as with earlier K series

The front brake plate on the 41 bike I have had no cable adjuster as would be expected with a brake rod

Br
Jo’b

email (option): jonnyob1@googlemail.com

Re: Forum wisdom required....

https://ibb.co/rbW9YnT
I hope the picture works this time

email (option): mickwalsh57@gmail.com

Re: Forum wisdom required....

I took the liberty of posting your picture Michael. Ron
SAM-2143

email (option): ronpier@talk21.com

Re: Forum wisdom required....

Thanks Ron.
Mike W

email (option): mickwalsh57@gmail.com

Re: Forum wisdom required....

In one of the posts I remember seeing the Saddle Bolts/Studs were different for the early BSAs to accommodate the Horn.
Please validate my understanding

Pratap Henry

email (option): prataphenry@gmail.com

Re: Forum wisdom required....

Correct Pratap. The left side saddle spring stud has a flat with a hole to hang the horn from. Ron
C4347367-2

email (option): ronpier@talk21.com

Re: Forum wisdom required....

Yes this is the left hand bolt, other side has a standard hex head I think?

Rob

sad-bolt

email (option): robmiller11(a)yahoo.co.uk

Re: Forum wisdom required....

Did all of the WM20's have horn in that location, as I have seen some mounted in front between engine and frame.

email (option): tknalder@iinet.net.au

Re: Forum wisdom required....

Kim,

No not all M20's had the horn located there. According to the historic facts, the horn was relocated sometime in 1942. I don't know the reason, but I have heard, that the horn couldn't be heard when the rider was wearing the long mac, whether that's true or not.

email (option): jeepfinger@blueyonder.co.uk

Nieuwe pagina 1