Thanks guys, Luckily no WD parts were harmed in the making of this. The forks are actually Indian copies. Despite there bad press touch wood after all the abuse I’ve given them they’ve held up pretty good over the last 7 years. If I was piecing together a stocker then more than likely I’d have come across problems with them.
Hi Harley, I love the look of your bike. If the head is ported at 26mm, as far as I know there's no advantage putting a 30mm carb on. I would lean the plug and do a "plug chop" at full throttle and see what the colour is to find out if it's running lean. If it is you can go up a size on the main jet. If it's the correct colour or black, it doesn't need any more fuel. That's where I'd start.