Hi all
Can anyone post photos of original rear carriers used on Bsa m20

I have 2 but both are different slightly in as much as one has a flattened area to avoid the rear rib on the mudguard and the other doesn’t

The one which doesn’t - came from a 41 dated m20 originally

We’re there 2 types used ?

Best regards

John

email (option): jonnyob1@googlemail.com

https://www.flickr.com/photos/163996711@N07/shares/chNf6X

email (option): bongiovanni1988@libero.it

Thank you Mauro

I’ll try check that link

Many thanks

Jo’b

email (option): jonnyob1@googlemail.com

Hi Mauro

Thank you for this

The carrier I have seen on your link is the late war type used to attach the pannier frame & bags

The carrier I am looking for was fitted to pre and early war bikes - it just sits on top of the rear mud guard

Any one got photos of these ?

Many thanks

Job

email (option): jonnyob1@googlemail.com

Hi John
the Image I have attached is from a BSA WD M20 spare Parts list dated January 1944, for RAF BSA 500cc SIDE VALVE MOTOR CYCLE COMBINATION
This spare parts list/book is applicable to :-
200 Machines to Contract No C10655
309 Machines to Contract No C14052

The spare part number for the carrier in the diagram is 66-6979

Hi john

Thanks for this - I have the same illustration

I can’t post photos here as I use my phone to log on

It’s the rib in the centre I have the question on

I’ll have to keep on looking at restored bike photos

Br

Jo’b

email (option): jonnyob1@googlemail.com

Hi John, hope this helps:







From a 1940 bike, Cheers, Michiel

Hi Michiel

That’s great - thank you

I’ll send you photos of both my carriers via email so you can see what I have and maybe for you to comment

I can’t post photos here

Br
jo’b

email (option): jonnyob1@googlemail.com

Thanks for your photos and good advice as always Michiel

Jo’b

email (option): jonnyob1@googlemail.com

John you could look in the technical section, this is where I copied my from....