Questions? Looking for parts? Parts for sale? or just for a chat,

The WD Motorcycle forum

WD Motorcycle forum
Start a New Topic 
Author
Comment
View Entire Thread
Re: What Spares

:relaxed: I've seen enough of Matchlesssessssess not to want another one....

Conversely I've ridden the M20 to Normandy and back numerous times and never bothered with Eurocover....It always does the job..I haven't broken down on the road in 20 years....Matchless?...All mouth and trousers:laughing: :laughing: ...Ian

email (option): ian@wright52.plus.com

Re: What Spares

Ian, do I mis-remember or was it you who many years back now, sent me a photo of your Matchless parked up by a sign to Le Mans??

email (option): fergusanckorn@icloud.com

Re: What Spares

Dave, you haven't said where you are, and how accessible specialists or other enthusiasts are. If you're in the UK and close to a magneto man, then you don't have too much of a problem, but overseas or the North of Scotland and entrusting your only mag to the postal service is going to be nerve-wracking and prone to delays.

If you're in a local MV club with some other M20s or Wd bikes then someone close will probably be able to lend parts to keep you going.

Re: What Spares

Well thanks again to all for the information and advice its very helpful and much a appreciated because I'm a total Rookie when it comes down to the British 4 stroke .As previously mentioned I've raced 2 strokes and my 2 lads race them now ,so 2 strokes I'm ok with( well there's nowt to em ):grinning:

I've been scouring the net and found most of the bits , could anyone tell me the part number for the Gear Return Spring as I cant seem to find it ,also are these the correct part numbers and quantities for the clutch :

8@ Clutch ferodo ring 15-2419
4@ Clutch driving plate 66-3812
3@ Clutch driven plate 15-4307
1@ Clutch sliding plate, with bolts 15-4308

Also I've been looking for a parts book,I have found some but can't seem to find one relating the the WM20.

I live up in North Yorkshire so things are always a bit hard to get hold up North :slightly_smiling_face:

Dave

email (option): davemb42@yahoo.com

Re: What Spares

One small item not mentioned you should definitely carry is a spare split link for the rear chain.
And a comprehensive list of obscenities to scream at errant motorists- so much more satisfying than using the horn.

Re: What Spares

Bob
One small item not mentioned you should definitely carry is a spare split link for the rear chain.
And a comprehensive list of obscenities to scream at errant motorists- so much more satisfying than using the horn.
Thanks Bob ,I'll get a couple sorted .I understand the comprehensive list is universal and applies to all models ? :grin:

Do you happen to know the part number for the gear lever return spring please ?

Dave

email (option): davemb42@yahoo.com

Re: What Spares

Pawl return spring..15-4161.

Henk who runs this forum can provide workshop manuals and parts lists for WDM20s on disc...

Ferg...Sorry...It wasn't me on the Matchbox...Ian

email (option): ian@wright52.plus.com

Re: What Spares

Dave
Yes, the standard motorcycling list is adequate. You will of course tailor it to your specific needs.
Ian has listed the return spring part number. Should you have to get the gearbox cover off for any reason, don't forget that rear securing bolt attached from behind the selector casing. Hope that made sense.

Re: What Spares

Ian Wright
Pawl return spring..15-4161.

Henk who runs this forum can provide workshop manuals and parts lists for WDM20s on disc...

Ferg...Sorry...It wasn't me on the Matchbox...Ian
Thanks Ian

email (option): davemb42@yahoo.com

Re: What Spares

Bob
Dave
Yes, the standard motorcycling list is adequate. You will of course tailor it to your specific needs.
Ian has listed the return spring part number. Should you have to get the gearbox cover off for any reason, don't forget that rear securing bolt attached from behind the selector casing. Hope that made sense.
Thanks Bob. I'm trying to get together a basic kit for roadside repairs . I've been scouring the net for original tools Russel Motors sent me some NOS still wrapped and labeled tools, I'll of course carry the modern versions just in case .
Yes I'm with you on the rear securing bolt , thanks for that as no doubt I would have been scratching my head :thinking_face:

Dave

email (option): davemb42@yahoo.com

Re: What Spares

Dave
Glad that made sense to you as it's not very well put, done in a hurry. I just meant to make sure you locate all the fasteners, some of the bolts can be tricky to get at.

Re: What Spares

Bob
Dave
Glad that made sense to you as it's not very well put, done in a hurry. I just meant to make sure you locate all the fasteners, some of the bolts can be tricky to get at.
Hi Bob

I'll have to spend time having a good look at everything just to get the jist of things. One thing I picked up while reading bits and pieces on the net was ,if its being parked up for a month or so is to drain the oil tank ,if not oil accumulates in the sump ? I'll no doubt be asking quite a few questions over time from owners that know the WM inside out .

Dave

email (option): davemb42@yahoo.com

Re: What Spares

Hi Dave
Yes, oil will eventually drain through into the sump. You can run the motor to pump it all back, if possible do this in the proximity of neighbours you don't like as there's a formidable smoke cloud emitted. It's probably not very good for the engine either, maybe gumming things up a bit. Others would know.

Nieuwe pagina 1