Sorry to jump in, but how many spacer/washers should be on the speedo side? The photo and Drags say 2, Russell's say 1 I don't think that I had any on mine when she was
on the road last.
Dave
Dave it's a strange thing that BSA fitted two spacer washers here and they are clearly shown in the parts list. But I have seen bikes fitted with two and also one. As it happens my WM20 is fitted with one 'extra thick' washer and my M20 special has the two as stated. So unless Les is selling the extra thick spacer washer, I'm not sure if he is right Ron
Yes it does seem to be a bit confusing. I don't know what the thickness should be.
I don't have any Mic's to measure the thickness, but will be able to hopfully this week.
Mark. Refer back to the parts list drawing I posted. Spacer washers 47 and nut 48 are on top of the speedo drive. Washer 46 sits in a recess inside the speedo drive. Ron
Ray thanks for the link to the other thread. It was very helpfull in giving the thickness of the said washers.
Ron, I managed to measure the thickness. My neighbour had a set of Mic's, he is an ex BSA employee, and is 96, and was working at BSA until Feb 1942 when he was called up.
We both measured the thickness, the washer was 0.125 thou, the same as what Neale mentions. So it is not one of Les's thick washers.
Yes that's 1/8" Dave which sounds exactly right. Two needed to make up the 1/4" required spacer. God knows why they didn't just produce a 1/4" spacer which is what mine appears to have. Maybe it was to do with having a choice depending on the splay of your forks Ron
Mark. Refer back to the parts list drawing I posted. Spacer washers 47 and nut 48 are on top of the speedo drive. Washer 46 sits in a recess inside the speedo drive. Ron
Yes your dead right, it's a silly idea having 2 spacers instead of the one. I have 2 so shall see how it goes, when I get around to that job.
I got one of the inside speedo washers from Les last year, mine was missing