Re: Off topic- looking for a 5/8"x20 NSC cap/plug to block breather...
Hi Noam. I guess you mean male. Is it 5/8" x 20 tpi BSC? Taps and dies are off the shelf here http://www.tracytools.com/taps-and-dies/20-TPI-CYCLE-PITCH
or google search for bolts/sets with that thread. Ron
Re: Off topic- looking for a 5/8"x20 NSC cap/plug to block breather...
Hello Ron.
Yes, sorry. Male it is. mail is that thing with the stamps... Hahaha...
On the "Technical section hints and tips" in the site, under "Threads: Engine, Gearbox & Primary drive" http://wdbsa.nl/Threads.htm
The Doctor stated:
"C.case breather to c.case 5/8x20 NSC
C.case breather to vent pipe nut 7/16x20 NSC (7/16 UNF alt.)
C.case breather fitting to breather body 5/8x20NSC"
I am not sure if it it a mistake, as the NSC repeats 3 times.(?)
On this site I could find the BSC, but not the NSC.
Would the BSC fit?
Re: Off topic- looking for a 5/8"x20 NSC cap/plug to block breather...
When I wrote that piece I used 'NSC' top denote 'non standard cycle'...That is noted somewhere in the details I believe...
'Non Standard' refers to the fact that many people believe incorrectly that Cycle Thread is 26 tpi at all diameters and in all applications...That is not the case....
So, the thread you need is Cycle Thread but in the 20tpi format...Ian