I just finished mounting my new 8" headlamp, looks great, tested the reconditioned switch and HORROR!! there is a defect somewhere in the innards; whem I wiggle the knob, the light sometimes flickers but usually it stays dark.
So has anybody for sale a spare switch LU/351590 in reasonable condition? I already have the knob...
Hans
viaconsu[at]planet[dot]nl
Probably just needs a good clean around the contacts with switch cleaner and fine emery paper and lubricate with WD40. Worth a try Hans as you have to remove it anyway. Ron
I had this done by an experienced electrical engineer, it worked ok off the bike, but once in the headlamp shell no luck...
I’ll have another look at it, but I fear a replacement will be in order
I just finished mounting my new 8" headlamp, looks great, tested the reconditioned switch and HORROR!! there is a defect somewhere in the innards; whem I wiggle the knob, the light sometimes flickers but usually it stays dark.
So has anybody for sale a spare switch LU/351590 in reasonable condition? I already have the knob...
Hans
viaconsu[at]planet[dot]nl
It was nothing to do with me
If the switch works out of the headlight shell it sounds like a terminal is shorting against it when fitted. Have a look to see if it's touching anywhere.
I always put an earth wire to the rear light, I feel that if I have painted the bike thoroughly electricity shouldn't be able to jump between all those parts.