Hi, don't know if this helps anyone else but I have got a flying flea, but it didn't have any points or condenser, after contacting this website a very helpful man told me to try a set of modern points, so I purchased a set of points and condenser from an early (1975 ish) honda c50, I removed the old points plate then drilled a locating hole in the mag cover for the points, then drilled and tapped a 4 mm hole to hold the points tight, I used one of the original holes to hold the condenser, hope this helps, I have got a photo of my set up if anyone wants it.
Steve
I too am restoring two flying fleas and a picture of your points setup would be very usefull in case my points were u.s. thanks for posting up an alternative system. John.
