Here a post from Dave on the HMVF Forum, let him know please what interest there is for these! Cheers, Lex
Flying Flea Rubber Suspension bands
I've been in discussion with a manufacturer that can make the "Not Available" centre (long) suspension band for the Flying Flea .
Hitchcock Motorcycles claim they are the same size as the small band and just need the width narrowing ...........they are not . The photo I have attached is of both small and long suspension band , the long one is an original very kindly loaned to me for comparison , as you can see there is a difference , the difference is 18mm .
The manufacturer can make these too the exact spec as the original ,the drawback is I have to order a minimum of 50 .
I have had some definites of people wanting these and was hoping to gauge the interest with some more definites before I go ahead with getting these made as the cost to me is £475.00 inc vat which equates to £9.50 each , all I'm trying to do is cover the cost and provide the correct band for all the Flea owners so I'll sell these for what it costs me.
Hopefully there will be enough interest . If anyone is interested please pm me, or post here with the amount you want so I can decide whether to go ahead with it or not .
Thanks
Dave
email (option): welbike@welbiXX.net (think about this!)
hi lex!! good news!! 2 for me please 
email (option): leger-arnaud@wanadoo.fr
Well add me for two as well Dave, even though I have a NOS original fitted........
Now, will somebody look at other scarcer Flea parts for manufacture ?
Miller tail-lights (will fit on a Lucas base with light mods) and also fit WD Velo's and a few G3L's........
Miller 4-position WD light switch tops (CH H T P), the lower part of the switch, the knob, and central rotor being largely interchangeable with other Miller switches with light mods........again, fitted to Velo's and a few G3L's.......
The flywheel cover bakelite wiring plug..........
miller switch faces are copied now, small batch.... lighting plug also, lodge plug also, and airmaze plates...... also 
just need wait a little for the tyre pump, leather straps, and mansfield plates... sorry french are slow in their work...
Here are some of Arnauds excellent parts (there are more). The detail and fit is superb.
Ron
email (option): ronpier@talk21.com
Arnaud, (via Ron) many thanks for this. Arnaud, could you email me at your convenience as I'm keen to obtain some of your excellent parts
Many thanks
email (option): sjmwdbikemad@aol.co.uk
Now, will somebody look at other scarcer Flea parts for manufacture ?
Miller tail-lights (will fit on a Lucas base with light mods) and also fit WD Velo's and a few G3L's........
Miller 4-position WD light switch tops (CH H T P), the lower part of the switch, the knob, and central rotor being largely interchangeable with other Miller switches with light mods........again, fitted to Velo's and a few G3L's.......
The flywheel cover bakelite wiring plug..........
Will do Steve
Thanks
Dave
['Here are some of Arnauds excellent parts (there are more)']....
What other parts does Arnoud make?...Ian
Yes Ron, i'm in a rural area of France, but sometimes i'm also a "daddy" and no time for motorcycles... yes i make parts for me, but when the mold is ok why not making some more to help some others,not a commercial affair, don't want make business, just help, it's my own see of collecting world. but some parts are only for me or "of forum"for friends... seriously , i make all bakelite parts who are hard to find or cost an arm.
and special for Steve, many thanks to you Steve, 12 years ago in my rural France, you're the only british name on a book who help us without the existence of internet.
and very special thanks to all the persons who loan rare parts and informations to me..
contact of forum if someone need something please...maybe i could help sorry almost part are Royal Enfield or standard....
Arnaud, you are too kind ! Thank you. I have emailed you off forum