I am reassembling my clutch and I am not sure how far I should tighten the large nut that depresses the clutch spring. I have attached a picture of how far the nut is on now. Should I keep going or have I gone too far?

Thanks,

Brian

email (option): bbrown3407@charter.net

Hi Brian....Tighten it all the way until it won't go any further...

Then knock it up tight using a C spanner or aluminium drift and a hammer...Ian

email (option): ian@wright52.plus.com

Ian,

Thanks for the quick response and advice. I appreciate it!! Back to the garage!!

Take care,

Brian

email (option): bbrown3407@charter.net

Here is where I ended up.

Thanks again for the advice Ian!!

email (option): bbrown3407@charter.net