Hi Justin...You're going to need quite a few parts to get this one right...E mail me a clear photo of each side of the bike and I'll go through it as best I can....
Have you confirmed the date of manufacture from the frame number?...You'll need to do that if you haven't already to be sure you are looking for the correct parts....Ian
email (option): ian@wright52.plus.com
Ian. If you go onto the top of Justin's pic's you will see a faint arrow pointing down click on that it blows the pic right up !
Gary
email (option): garypitt@talktalk.net
Hi Justin,
I am not one of the biggest experts here, for sure,
But you would need, at least:
Rear mudguard and stay kit, the licence plate holder assembly, rear light,
Front mudguard and stay kit, Headlight assy (Ammeter, switch)
Saddle, silencer, handlebars, correct carb, chainguards, battery case, horn.
Of course, you can add pillion seat, panniers and racks,
And more, depend how far you would like to go...
Good luck ! 
Noam.
email (option): noam10@gmail.com
Hi Gary..That isn't happening for me...
...Ian
email (option): ian@wright52.plus.com
Hi Noam...I can get all four images but can't enlarge them...and my patience isn't good when it comes to computers...
...Ian
email (option): ian@wright52.plus.com
Hi Ian,
I will save and e-mail you. 
Noam.
email (option): noam10@gmail.com
....Ian
email (option): ian@wright52.plus.com
Hi dear Ian,
Done !
Noam.
email (option): noam10@gmail.com
By the way,
A "trick" to blow any thing on your screen (Microsoft Windows users)
On the screen you want to blow/enlarge,
Hold down the "Ctrl" key, and while it is pressed,
Use the MOUSE wheel to enlarge the screen:
Roll it FW to enlarge, and back, in order to shrink.
At the end, you can press "Ctrl" + "0" (Zero) together,
In order to go back to the default screen size.
Noam.
email (option): noam10@gmail.com
Thanks Noam...I've mailed you ref. the M20 valves discussed the other day....Ian
email (option): ian@wright52.plus.com
Thanks Ian !
I replied..
Noam.
email (option): noam10@gmail.com