Hi All. Two questions.
1) Anyone know where I can get parts 24-4236 ball race oil retaining washer and 24-4235 ball race oil fling washer,or at the very least the dimensions, particularly the thickness. Onslows and Dragonfy are out of stock.
2) When assembled with outer cover still off, I have noticed the gear control shaft " floats" in and out of its shaft bush quite a bit as you change up and down the gears.Is this correct?
Many Thanks Andy B.

Can't help with 1 but as for 2,
The shaft is retained by a plain wire circlip oft called gear retainers.
There are two fitted to WM20's.
One retains the gear change indicator
the other retains the shaft.
Without it ( and I have seen a lot of bikes without the clip fitted ) the shaft will slide outwards and the pawls will only engage with 1/2 the ratchet till eventually the corner chips off.

email (option): wariron@tpg,com,au

Hi Andy,Russell motors have both listed at £3.00 each
cheers Rick

email (option): richardholt@rocketmail.com