Please can anyone advise where I can get replacement grub screws that fit the brass cable connectors on this bike, all of the slot head grub screws appear to be 1/4" x 26TPI x 3/8" OAL.
Can't see them on Draganfly?
Hi Julian, I usually lop the end of a 1/4 Cycle bolt for the one in the clutch arm, clean it up and then put the screwdriver slot in it with a Junior hacksaw. You can then black it with gun black if you don't have a stainless bolt or blast it to look similar to cadmium if you do....Ian
As I've got a few to replace I'm considering making a little jig with 10 in and row, all screwed in to a block of ali and then running the slitting saw across the lot, finish with a nice little deburr and chamfer, who needs Draganfly anyway, LOL