can anyone tell me how the parts fit together. I had no screw for the twist Grip clip so I made one but do not know how to mount it. I thought the screw was riveted to the clip but no idea. If someone have a picture or an explanation I would be very happy.
The stub on the screw enters into the spring clip and thereby holds it in position but it is not attached. It pushes the friction spring against the twist-grip drum.
Phillip I think originally the turned down end of your screw was slightly peened into the hole in the bottom of your clip. They usually part company I find and are just as good if you assemble it carefully so that the screw is in the hole. Once put together on the bar, it will stay put. Ron