Questions? Looking for parts? Parts for sale? or just for a chat,
The WD Motorcycle forum
Hi Guys Can someone tell me if I can use a monoblock carb for an m21 or any other carb, as the originals from 276 Amal are expensive, If you can dose anyone have the specs required for that carb
email (option): markbrob1@hotmail.com
M21 376 monobloc Bore = 1 1/16" Main jet = 250 Pilot jet = 30 Throttle valve = 376/5 Needle position = 2 Needle jet = .1065 Air cleaner = yes Carb model 376/23
Hi Mark, And this is the set up for the 1" bore 376, as used on the later M20s,(NOT M21) to replace the 276: Spec. 376/21 Choke 1 inch Main jet 240 Pilot jet 25 Needle jet 106 Needle position 3 Throttle valve 5 Engine Type: 4 stroke Fuel Type: petrol On the M21 1 1/16" the needle jet is also 106. Fread's finger slipped alittele.. Noam.
email (option): noam10@gmail.com
"Fread" ?? I think your finger slipped My finger didn't slip, .1065 is the size of the needle jet.