Reopening the post again.
Can anyone share photographs of the rear wheel washers alone. Please share pics of
1. Washer between the speedo drive and frame
2. Washer inside/inbetween Sprocket and the inside of the rear brake plate.
3. Washer between outside of brake plate and frame.

Personally checked them on www.jampotarchieve.com but couldn't get a clear picture. thankful if anyone can show some pictures.

Tavery

email (option): tavery.p@hotmail.com

email (option): tavery.p@hotmail.com

Hi Tavery,

Same proplem. Thanks fro bringing this up.

I'm looking for a petrol tank and several other bits.
If you have anything spare, please let me know.

Robb

email (option): britool51@hotmail.com

I'm not sure what you mean by washers? Inside the speedo
drive is spacer W41 G3L 11265. Between speedo drive and frame is spacer # H106 (1" diam x 15/16" long). Between brake plate and into frame fork is # B54 with two flats.
Any washer inside the drum would just need to be thick enough to stop the shoes and or brake plate making any contact. Ron

email (option): ronpier@talk21.com

You can buy all these parts new from Russell's. John

email (option): Tinley@btinternet.com

Do not leave out the spacer inside the speedo drive or you will crush it out of shape. As you can see on the brake side, there is a spacer that sits over the slotted distance piece which bears against the rear fork.The spacer inside the brake drum also acts as a seal surface, bearing against the axle bearing.

Here is the line drawing from the workshop manual-

Hope it helps.
Cheers, Mick.

email (option): mick@motorbikemike.org.uk