Hi all
Can anyone confirm that only one clutch sleeve is available for the WD m20

It seems the sleeve fitted to my new clutch is missing the raised sleeve section at the rear where it accomodates the cork seal

If this was a press fit, it seems to have fallen out

It does not appear as an individual part number

Any ideas ?

Many thanks

Job

email (option): Jonnyob1@googlemail.com

Hi John..I've never seen an M20 clutch sleeve without the recess for the cork ring. I have modified M20 sleeves for other purposes and ground the back off them and they don't seem to be a two piece construction. The number for the cork is 66-3813....Ian

email (option): ian@wright52.plus.com