Hi Rob n Ron thats purrrfect, Ill keep looking for one, till then will fit a repro sd lucas one for now as the bolt holes appear the same as already in place, thats also the first time I have seen this drawing. The parts book only details the part no, thanks, Andrew.h.
Andrew I have never found an original Miller tail lamp. They were only fitted to Fleas, Velo MAF's and I believe the Miller equipped G3L's.
However, the lens part is fitted to other Miller lamps. By using one of these lens parts and a Lucas base and with drawings and measurements from my friends in Holland. I found the right size tube. I got my mate to make the ring and do some gentle machining on his lathe.
By soldering the ring to the tube and sanding the Lucas writing off the base, I got this fairly accurate repro.
That other little Miller lamp you show Lex. I have found several like that but always to small. I believe the small ones are Corgi tail lamps. Maybe the larger ones are from an Auto-cycle?? Ron
That other little Miller lamp you show Lex. I have found several like that but always to small. I believe the small ones are Corgi tail lamps. Maybe the larger ones are from an Auto-cycle?? Ron
Hey guys, thanks for posting these pics, I need one for a Miller G3L I'm rebuilding. I made this from a drawing Steve Madden sent me-
Perhaps by adding that ring I'll get away with it!
Cheers, Mick.
Thanks chaps, Ill track down a miller to take a lens from to start with, and use a repro base with no markings should get the flea finished over christmas, by the way have found a horn, rubber bulb type, thats looks good, not too long about 7inches plus bulb, its of course repro with metal horn, thats painted, will blast the chrome off the bracket and zinc plate the bracket, take care out there, first good frost tonight, andrew.h.