the problem with the single spring clutch is that it is hard to get the clutch to run true because the single springs are not very level at either end so you tend to get pulsing/drag from the clutch as i understand with these multi spring clutches you can ajust it to run truer i run my clutch with one less steel and one less friction plate runs quite well selects nicely with the full set of plates i couldnt get it to select a gear when stationary without crunching them even thought i selected the truest spring i could find and trying to keep oil off it is hard there is a modefide triumph clutch that fits
I have the same problem.... I dont have a steel and friction plate in because it was too thick! I the beginning the bike runs great but now the engine runs faster in the first two gears and the bike has less power in the first two gears. The 3 and 4 evetyting is normal....
And I dont know how to solve the problem.... clutch is free from any oil....