Comment
Matias, is it this nut ?
If so, then it is indeed 5/16" - If you've got an odd sized rod then make sure it isn't Norton. They're 5/16' rods but reduced to 9/32" for the threaded section.
I've still got a couple of these nuts NOS at £7.50 each if anyone wants one.
Rik
IainB
Rik,
i would be keen on a wingnut if there is still one available.
i would be keen on a wingnut if there is still one available.
Iain, have you bought yourself a BSA ? This nut doesn't fit the standard Norton rod, nor does it have quite the correct extended 'Mickey Mouse' type ears.
If you're using a modified rod though, it would certainly do the job and look the part.
Brain fade strikes again
Just back from 9 days riding to and from the NZ NOC rally, should be recovered soon
IainB
Brain fade strikes again
Just back from 9 days riding to and from the NZ NOC rally, should be recovered soon
On the Commando Iain ? Pure isolastic relaxation !
Rik
On the Commando Iain ? Pure isolastic relaxation !
Sadly no
, i was on my modern. Since my 16H has swallowed my wallet my Commando is sitting in need of tlc, which won't happen until the 16H spend is under control and the work platform is free. I did ride with 3 Commando's - 4200km (2600mile) round trip and only a few loose elec connections, 3 x forgot turn the petrol on, and one drained tank from a fuel line which fell off while in motion.